| 2023-11-24 18:35:08 +0000 | commented answer | TCP Retransmits over industrial network Sorry for late response. Yes, of course, every retransmission is a waste of resources and yes even the fast-retransmit w |
| 2023-10-02 09:42:45 +0000 | commented question | No ack with dropped packet on win2019 hosted as VMs just 2 frames are not enough,. please share the whole communication as pcap. comparing only 1 frame is not helpful. |
| 2023-10-02 09:42:36 +0000 | commented question | No ack with dropped packet on win2019 hosted as VMs just 3 frames are not enough,. please share the whole communication as pcap. comparing only 1 frame is not helpful. |
| 2023-10-02 07:51:23 +0000 | commented question | No ack with dropped packet on win2019 hosted as VMs may you have the ability to upload the pcap? reading this as text only is very very hard. |
| 2023-10-02 07:48:38 +0000 | commented answer | Why won't RTMP packets show up in my capture? Then you should change the Port in Settings/Protocol and add the servier side port to the ports 1935 which is configured |
| 2023-10-01 11:32:44 +0000 | commented answer | tcpdump overlapping packets totally agree here. If you open Statistics /TCP Stream Graph/tcptrace you will see, that this can not be true! You see a |
| 2023-10-01 11:10:11 +0000 | received badge | ● Rapid Responder (source) |
| 2023-10-01 11:10:11 +0000 | answered a question | Why won't RTMP packets show up in my capture? May it is using a different port than expected. Which port is the UDP traffic on? RTMP is expected to be on port 1935. I |
| 2023-10-01 11:02:46 +0000 | commented answer | Is there a Wireshark filter that hides all broadcast packets. IPv6 does not have really any broadcast mechanism,.. but you could exclude any relevant multicast addresses. If you woul |
| 2023-09-29 19:12:42 +0000 | received badge | ● Editor (source) |
| 2023-09-29 19:12:42 +0000 | edited answer | Is there a Wireshark filter that hides all broadcast packets. Which OSI layer you looking for? Mac Layer: MAC broadcast is ff:ff:ff:ff:ff:ff so the filter would be "eth.addr!=ff:f |
| 2023-09-29 18:23:09 +0000 | received badge | ● Rapid Responder (source) |
| 2023-09-29 18:23:09 +0000 | answered a question | I just installed Wireshark - cannot capture packets Could be many reasons. May seems, you may not have the rights to capture. Did you install NPCAP driver with default se |
| 2023-09-29 18:13:11 +0000 | received badge | ● Rapid Responder (source) |
| 2023-09-29 18:13:11 +0000 | answered a question | Is there a Wireshark filter that hides all broadcast packets. Which OSI layer you looking for? Mac Layer: MAC broadcast is ff:ff:ff:ff:ff:ff to the filter would be "eth.addr!=ff:f |
| 2023-09-29 17:44:28 +0000 | received badge | ● Rapid Responder (source) |
| 2023-09-29 17:44:28 +0000 | answered a question | TCP Retransmits over industrial network Hi, this is a mismatch between the Windows Client and the Windows Server and belongs to the TCP Profile used for the tr |