Ask Your Question
0

NGAP is not decoded how can i see details of message?

asked 2018-11-29 14:19:31 +0000

erhan gravatar image

updated 2018-11-29 15:03:34 +0000

grahamb gravatar image

Frame 215: 182 bytes on wire (1456 bits), 182 bytes captured (1456 bits) on interface 0

  Ethernet II, Src: 00:00:00:00:00:00 (00:00:00:00:00:00), Dst: 00:00:00:00:00:00 (00:00:00:00:00:00)

  Internet Protocol Version 4, Src: 127.0.0.1, Dst: 127.0.1.1

  Stream Control Transmission Protocol, Src Port: 56035 (56035), Dst Port: 38412 (38412)
    Source port: 56035
    Destination port: 38412
    Verification tag: 0x67eef5b4
    [Association index: 0]
    Checksum: 0x00000000 [unverified]
    [Checksum Status: Unverified]
    DATA chunk(ordered, complete segment, TSN: 2348454238, SID: 0, SSN: 0, PPID: 0, payload length: 117 bytes)
        Chunk type: DATA (0)
            0... .... = Bit: Stop processing of the packet
            .0.. .... = Bit: Do not report
        Chunk flags: 0x03
            .... ...1 = E-Bit: Last segment
            .... ..1. = B-Bit: First segment
            .... .0.. = U-Bit: Ordered delivery
            .... 0... = I-Bit: Possibly delay SACK
        Chunk length: 133
        Transmission sequence number: 2348454238
            [This chunk is acked in frame: 216]
                [The RTT to SACK was: 0.000008574 seconds]
        Stream identifier: 0x0000
        Stream sequence number: 0
        Payload protocol identifier: not specified (0)
        Chunk padding: 000000

  NG Application Protocol
    1... .... Extension Bit: True
    .0.. .... Small Number Bit: False
    Choice Extension Index: 32
    Open Type Length: 115
    Choice no. 32 in extension
        [Expert Info (Note/Undecoded): Choice no. 32 in extension]
            [Choice no. 32 in extension]
            [Severity level: Note]
            [Group: Undecoded]
edit retag flag offensive close merge delete

Comments

What version of Wireshark are you using and what version of the 3GPP Specification is your system using?

Anders gravatar imageAnders ( 2018-11-29 14:48:47 +0000 )edit

Hi Anders, I am using last development version of wireshark for ubuntu and last 3GPP spec version. When I set GUAMI I get malformed message error I think it is because spec version. But above message not includes Guami. Thanks.

erhan gravatar imageerhan ( 2018-11-29 15:03:53 +0000 )edit

1 Answer

Sort by ยป oldest newest most voted
0

answered 2018-11-29 15:38:09 +0000

Anders gravatar image

updated 2018-11-29 15:38:30 +0000

The begining of the message looks broken or has private extensions? A message I have looks like:

NG Application Protocol 0... .... Extension Bit: False Min: 0 Range: 3 Bitfield length: 2 Bits: .00. .... decimal value: 0 Choice Index: 0 NGAP-PDU: initiatingMessage (0) initiatingMessage

edit flag offensive delete link more

Comments

Thanks for your help. Problem is we used ber encode. We are going to use per encode and retry.

erhan gravatar imageerhan ( 2018-11-30 08:03:14 +0000 )edit

Your Answer

Please start posting anonymously - your entry will be published after you log in or create a new account.

Add Answer

Question Tools

1 follower

Stats

Asked: 2018-11-29 14:19:31 +0000

Seen: 1,564 times

Last updated: Nov 29 '18