Hi All, I would like to see multipoint LDP FEC elements like
ldp.msg.tlv.ldp_p2mp.addr_len Address Length Unsigned integer, 1 byte 1.12.0 to 2.4.2 ldp.msg.tlv.ldp_p2mp.ipv4_rtnodeaddr Root Node Address IPv4 address 1.12.0 to 2.4.2 ldp.msg.tlv.ldp_p2mp.oplength Opaque Length Unsigned integer, 2 bytes 1.12.0 to 2.4.2 ldp.msg.tlv.ldp_p2mp.opvalue Opaque Value Sequence of bytes 1.12.0 to 2.4.2 ldp.msg.tlv.ldp_p2mp.type P2MP Type Unsigned integer, 1 byte 1.12.0 to 2.4.2
I see that they are supported but when I open a capture with these packets wireshark cannot decode them
Frame 6130: 108 bytes on wire (864 bits), 108 bytes captured (864 bits) on interface 0 Ethernet II, Src: ca:01:1d:fd:00:08 (ca:01:1d:fd:00:08), Dst: ca:02:1e:0c:00:08 (ca:02:1e:0c:00:08) Internet Protocol Version 4, Src: 10.0.0.101, Dst: 10.0.0.201 Transmission Control Protocol, Src Port: 646, Dst Port: 14535, Seq: 1981, Ack: 1981, Len: 54 Label Distribution Protocol Version: 1 PDU Length: 50 LSR ID: 10.0.0.101 Label Space ID: 0 Label Mapping Message 0... .... = U bit: Unknown bit not set Message Type: Label Mapping Message (0x400) Message Length: 40 Message ID: 0x00000132 Forwarding Equivalence Classes TLV 00.. .... = TLV Unknown bits: Known TLV, do not Forward (0x0) TLV Type: Forwarding Equivalence Classes TLV (0x100) TLV Length: 24 FEC Elements FEC Element 1 Unknown FEC TLV type [Expert Info (Warning/Protocol): Unknown FEC TLV type] [Unknown FEC TLV type] [Severity level: Warning] [Group: Protocol]
I used 2.4.2 on Windows and 2.2.6 on linux, same results, any ideas?
Thanks.