Ask Your Question

Revision history [back]

click to hide/show revision 1
initial version

new install issues

I was following the step by step guide (https://www.wireshark.org/docs/wsdg_html_chunked/ChSetupWin32.html) and I believe I did everything right using choc for the majority of the files. I am now at step 2.2.12 (generate the build files).

I modified the visual studio developer command batch file to change to the folder where the various var batch files are (C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build), and then manually ran vcvars64.bat. I then changed to the C:\Development folder and ran my batch file to set the QT values (set WIRESHARK_BASE_DIR=C:\Development and set QT5_BASE_DIR=C:\Qt\6.1.0\msvc2019_64). So far so good.

I changed to the wsbuild64 folder and ran "cmake -G "Visual Studio 16 2019" -A x64 ..\wireshark" ... lots of things happened until an error happened as follows:

    CMake Error at CMakeLists.txt:1188 (find_package):
  By not providing "FindQt5Core.cmake" in CMAKE_MODULE_PATH this project has
  asked CMake to find a package configuration file provided by "Qt5Core", but
  CMake did not find one.

  Could not find a package configuration file provided by "Qt5Core" with any
  of the following names:

    Qt5CoreConfig.cmake
    qt5core-config.cmake

  Add the installation prefix of "Qt5Core" to CMAKE_PREFIX_PATH or set
  "Qt5Core_DIR" to a directory containing one of the above files.  If
  "Qt5Core" provides a separate development package or SDK, be sure it has
  been installed.

I am guessing that when I installed QT, maybe I missed adding in something needed? I searched the QT folders for any reference to Qt5CoreConfig and found nothing... SO close to being able to build a custom version... thanks kindly in advance for your assistance :)

Gary

new install issues

I was following the step by step guide (https://www.wireshark.org/docs/wsdg_html_chunked/ChSetupWin32.html) and I believe I did everything right using choc for the majority of the files. I am now at step 2.2.12 (generate the build files).

I modified the visual studio developer command batch file to change to the folder where the various var batch files are (C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build), and then manually ran vcvars64.bat. I then changed to the C:\Development folder and ran my batch file to set the QT values (set WIRESHARK_BASE_DIR=C:\Development and set QT5_BASE_DIR=C:\Qt\6.1.0\msvc2019_64). So far so good.

I changed to the wsbuild64 folder and ran "cmake -G "Visual Studio 16 2019" -A x64 ..\wireshark" ... lots of things happened until an error happened as follows:

    CMake Error at CMakeLists.txt:1188 (find_package):
  By not providing "FindQt5Core.cmake" in CMAKE_MODULE_PATH this project has
  asked CMake to find a package configuration file provided by "Qt5Core", but
  CMake did not find one.

  Could not find a package configuration file provided by "Qt5Core" with any
  of the following names:

    Qt5CoreConfig.cmake
    qt5core-config.cmake

  Add the installation prefix of "Qt5Core" to CMAKE_PREFIX_PATH or set
  "Qt5Core_DIR" to a directory containing one of the above files.  If
  "Qt5Core" provides a separate development package or SDK, be sure it has
  been installed.

I am guessing that when I installed QT, maybe I missed adding in something needed? I searched the QT folders for any reference to Qt5CoreConfig and found nothing... SO close to being able to build a custom version... thanks kindly in advance for your assistance :)

Gary

new install build issues

I was following the step by step guide (https://www.wireshark.org/docs/wsdg_html_chunked/ChSetupWin32.html) and I believe I did everything right using choc for the majority of the files. I am now at step 2.2.12 (generate the build files).

I modified the visual studio developer Visual Studio Developer command batch file to change to the folder where the various var batch files are (C:\Program (C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build), Studio\2019\Community\VC\Auxiliary\Build), and then manually ran vcvars64.bat. vcvars64.bat. I then changed to the C:\Development C:\Development folder and ran my batch file to set the QT values (set WIRESHARK_BASE_DIR=C:\Development and (set QT5_BASE_DIR=C:\Qt\6.1.0\msvc2019_64). WIRESHARK_BASE_DIR=C:\Development and set QT5_BASE_DIR=C:\Qt\6.1.0\msvc2019_64). So far so good.

I changed to the wsbuild64 folder and ran "cmake -G "Visual Studio 16 2019" -A x64 ..\wireshark" ..\wireshark" ... lots of things happened until an error happened as follows:

    CMake Error at CMakeLists.txt:1188 (find_package):
  By not providing "FindQt5Core.cmake" in CMAKE_MODULE_PATH this project has
  asked CMake to find a package configuration file provided by "Qt5Core", but
  CMake did not find one.

  Could not find a package configuration file provided by "Qt5Core" with any
  of the following names:

    Qt5CoreConfig.cmake
    qt5core-config.cmake

  Add the installation prefix of "Qt5Core" to CMAKE_PREFIX_PATH or set
  "Qt5Core_DIR" to a directory containing one of the above files.  If
  "Qt5Core" provides a separate development package or SDK, be sure it has
  been installed.

I am guessing that when I installed QT, maybe I missed adding in something needed? I searched the QT folders for any reference to Qt5CoreConfig and found nothing... SO close to being able to build a custom version... thanks kindly in advance for your assistance :)

Gary

click to hide/show revision 4
None

new build issues

I was following the step by step guide (https://www.wireshark.org/docs/wsdg_html_chunked/ChSetupWin32.html) and I believe I did everything right using choc for the majority of the files. I am now at step 2.2.12 (generate the build files).

I modified the Visual Studio Developer command batch file to change to the folder where the various var batch files are (C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Auxiliary\Build), and then manually ran vcvars64.bat. I then changed to the C:\Development folder and ran my batch file to set the QT values (set WIRESHARK_BASE_DIR=C:\Development and set QT5_BASE_DIR=C:\Qt\6.1.0\msvc2019_64). So far so good.

I changed to the wsbuild64 folder and ran "cmake -G "Visual Studio 16 2019" -A x64 ..\wireshark" ... lots of things happened until an error happened as follows:

    CMake Error at CMakeLists.txt:1188 (find_package):
  By not providing "FindQt5Core.cmake" in CMAKE_MODULE_PATH this project has
  asked CMake to find a package configuration file provided by "Qt5Core", but
  CMake did not find one.

  Could not find a package configuration file provided by "Qt5Core" with any
  of the following names:

    Qt5CoreConfig.cmake
    qt5core-config.cmake

  Add the installation prefix of "Qt5Core" to CMAKE_PREFIX_PATH or set
  "Qt5Core_DIR" to a directory containing one of the above files.  If
  "Qt5Core" provides a separate development package or SDK, be sure it has
  been installed.

I am guessing that when I installed QT, maybe I missed adding in something needed? I searched the QT folders for any reference to Qt5CoreConfig and found nothing... SO close to being able to build a custom version... thanks kindly in advance for your assistance :)

Gary