Revision history [back]

Hello,

Thanks to supply wireshark.

My device transmit data as source port 5101 ~ 5108 in UDP. And destination port 5100, and support Multicast packet 60001 ~ 60008. This is normal packet.

But, wireshark doesn't display some multicast packets. https://drive.google.com/file/d/1Lxl6C9vYO2O_XcZyntynxltSE-nqfV1m/view?usp=sharing

So, wireshark display is good after click "Restart current capture".

This symptom occurs often.

Thanks.

Best regards, Baek.

v3.4.4 and v3.4.5 are same conditions.

Hello,

Thanks to supply wireshark.

My device transmit data as source port 5101 ~ 5108 in UDP. And destination port 5100, and support Multicast packet 60001 ~ 60008. 60008.

This is normal packet. https://drive.google.com/file/d/1gqkDMccVVzWjvWwWYc0XMwG7Hw9Xx9TD/view?usp=sharing

But, wireshark doesn't display some multicast packets. https://drive.google.com/file/d/1Lxl6C9vYO2O_XcZyntynxltSE-nqfV1m/view?usp=sharing

So, wireshark display is good after click "Restart current capture".

This symptom occurs often.

Thanks.

Best regards, Baek.

v3.4.4 and v3.4.5 are same conditions.

Hello,

Thanks to supply wireshark.

My device transmit data as source port 5101 ~ 5108 in UDP. And destination port 5100, and support Multicast packet 60001 ~ 60008.

This is normal packet. https://drive.google.com/file/d/1gqkDMccVVzWjvWwWYc0XMwG7Hw9Xx9TD/view?usp=sharinghttps://drive.google.com/file/d/1gqkDMccVVzWjvWwWYc0XMwG7Hw9Xx9TD/view?usp=sharing My device send data such as normal packet image. 5104 : transmit to 5100 and 60004 5102 : transmit to 5100 and 60003 (transmit from one source port to two destination port(5100 and multicast port(60001 ~ 60008)

But, wireshark doesn't display some multicast packets. https://drive.google.com/file/d/1Lxl6C9vYO2O_XcZyntynxltSE-nqfV1m/view?usp=sharing

But, sometimes doesn't display(capture) multicast packet such as error packet image.

So, wireshark display is good after click "Restart current capture".

This symptom occurs often.

I upload the log file in share folder. https://drive.google.com/drive/folders/1AVO0vxAuGzYpakLCg6G0_s3Sko_GCW-I?usp=sharing

ZMG-390_Log.pcapng Normal operation is until line 948. My device pause to transmit data. and restart. Wireshark is no capture multicast packet after line 949.

This file is after "Restart current capture". ZMG-390_Log_restart.pcapng

Thanks.

Best regards, Baek.

v3.4.4 and v3.4.5 are same conditions.

Hello,

Thanks to supply wireshark.

My device transmit data as source port 5101 ~ 5108 in UDP. And destination port 5100, and support Multicast packet 60001 ~ 60008.

This is normal packet. https://drive.google.com/file/d/1gqkDMccVVzWjvWwWYc0XMwG7Hw9Xx9TD/view?usp=sharing My device send data such as normal packet image. 5104 : transmit to 5100 and 60004 5102 : transmit to 5100 and 60003 (transmit from one source port to two destination port(5100 and multicast port(60001 ~ 60008)

But, wireshark doesn't display some multicast packets. packets.

https://drive.google.com/file/d/1Lxl6C9vYO2O_XcZyntynxltSE-nqfV1m/view?usp=sharing

But, sometimes doesn't display(capture) multicast packet such as error packet image.

So, wireshark display is good after click "Restart current capture".

This symptom occurs often.

I upload the log file in share folder. https://drive.google.com/drive/folders/1AVO0vxAuGzYpakLCg6G0_s3Sko_GCW-I?usp=sharing

ZMG-390_Log.pcapng Normal operation is until line 948. My device pause to transmit data. and restart. Wireshark is no capture multicast packet after line 949.

This file is after "Restart current capture". ZMG-390_Log_restart.pcapng

Thanks.

Best regards, Baek.

v3.4.4 and v3.4.5 are same conditions.

Hello,

Thanks to supply wireshark.

My device transmit data as source port 5101 ~ 5108 in UDP. And destination port 5100, and support Multicast packet 60001 ~ 60008.

This is normal packet. https://drive.google.com/file/d/1gqkDMccVVzWjvWwWYc0XMwG7Hw9Xx9TD/view?usp=sharing packet.

My device send data such as normal packet image. 5104 : transmit to 5100 and 60004 5102 : transmit to 5100 and 60003 (transmit from one source port to two destination port(5100 and multicast port(60001 ~ 60008)

But, wireshark doesn't display some multicast packets.

https://drive.google.com/file/d/1Lxl6C9vYO2O_XcZyntynxltSE-nqfV1m/view?usp=sharing

But, sometimes doesn't display(capture) multicast packet such as error packet image.

So, wireshark display is good after click "Restart current capture".

This symptom occurs often.

I upload the log file in share folder. https://drive.google.com/drive/folders/1AVO0vxAuGzYpakLCg6G0_s3Sko_GCW-I?usp=sharing

ZMG-390_Log.pcapng Normal operation is until line 948. My device pause to transmit data. and restart. Wireshark is no capture multicast packet after line 949.

This file is after "Restart current capture". ZMG-390_Log_restart.pcapng

Thanks.

Best regards, Baek.

v3.4.4 and v3.4.5 are same conditions.