Ask Your Question

Revision history [back]

click to hide/show revision 1
initial version

5 GHz Problems. Can someone help me with a single beacon?

Hello Everyone,

Forum is not letting me upload. Single AP beacon here (and one to STA).

http://s000.tinyupload.com/?file_id=35330149943409538026

http://s000.tinyupload.com/?file_id=37198976868210331014

I am not able to see the traffic on Kali with Alfa 36ACH on 5GHz on many APs. This my AP is an example. 2.4GHz is fine.

What "iw" command do I need to run to see clients of this AP?

Many thanks!

Jesus, this CAPTCHA expired again. It takes 5 minutes with 10 CAPTCHA screens. Who thought of putting this on logged in users???

5 GHz Problems. Can someone help me with a single beacon?

Hello Everyone,

Forum is not letting me upload. Single AP beacon here (and one to STA).

http://s000.tinyupload.com/?file_id=35330149943409538026

http://s000.tinyupload.com/?file_id=37198976868210331014

I am not able to see the traffic on Kali with Alfa 36ACH on 5GHz on many APs. This my AP is an example. 2.4GHz is fine.

What "iw" command do I need to run to see clients of this AP?

Many thanks!

Jesus, this CAPTCHA expired again. It takes 5 minutes with 10 CAPTCHA screens. Who thought of putting this on logged in users???

As requested:

iw phy phy5 info 

    Band 2:
        Capabilities: 0x19f2
            HT20/HT40
            Static SM Power Save
            RX Greenfield
            RX HT20 SGI
            RX HT40 SGI
            TX STBC
            RX STBC 1-stream
            Max AMSDU length: 7935 bytes
            DSSS/CCK HT40
        Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
        Minimum RX AMPDU time spacing: 16 usec (0x07)
        HT Max RX data rate: 952 Mbps
        HT TX/RX MCS rate indexes supported: 0-15
        VHT Capabilities (0x03c13aa2):
            Max MPDU length: 11454
            Supported Channel Width: neither 160 nor 80+80
            short GI (80 MHz)
            TX STBC
            SU Beamformer
            SU Beamformee
            +HTC-VHT
        VHT RX MCS set:
            1 streams: MCS 0-9
            2 streams: MCS 0-9
            3 streams: not supported
            4 streams: not supported
            5 streams: not supported
            6 streams: not supported
            7 streams: not supported
            8 streams: not supported
        VHT RX highest supported: 867 Mbps
        VHT TX MCS set:
            1 streams: MCS 0-9
            2 streams: MCS 0-9
            3 streams: not supported
            4 streams: not supported
            5 streams: not supported
            6 streams: not supported
            7 streams: not supported
            8 streams: not supported
        VHT TX highest supported: 867 Mbps
        Bitrates (non-HT):
            * 6.0 Mbps
            * 9.0 Mbps
            * 12.0 Mbps
            * 18.0 Mbps
            * 24.0 Mbps
            * 36.0 Mbps
            * 48.0 Mbps
            * 54.0 Mbps
        Frequencies:
            * 5180 MHz [36] (20.0 dBm) (no IR)
            * 5200 MHz [40] (20.0 dBm) (no IR)
            * 5220 MHz [44] (20.0 dBm) (no IR)
            * 5240 MHz [48] (20.0 dBm) (no IR)
            * 5260 MHz [52] (20.0 dBm) (no IR, radar detection)

5 GHz Problems. Can someone help me with a single beacon?

Hello Everyone,

Forum is not letting me upload. Single AP beacon here (and one to STA).

http://s000.tinyupload.com/?file_id=35330149943409538026

http://s000.tinyupload.com/?file_id=37198976868210331014

I am not able to see the traffic on Kali with Alfa 36ACH on 5GHz on many APs. This my AP is an example. 2.4GHz is fine.

What "iw" command do I need to run to see clients of this AP?

Many thanks!

Jesus, this CAPTCHA expired again. It takes 5 minutes with 10 CAPTCHA screens. Who thought of putting this on logged in users???

As requested:

Association Request From Client: http://s000.tinyupload.com/?file_id=06332711958857720015

lsusb: Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac 2T2R DB WLAN Adapter



iw phy phy5 info 

    Band 2:
        Capabilities: 0x19f2
            HT20/HT40
            Static SM Power Save
            RX Greenfield
            RX HT20 SGI
            RX HT40 SGI
            TX STBC
            RX STBC 1-stream
            Max AMSDU length: 7935 bytes
            DSSS/CCK HT40
        Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
        Minimum RX AMPDU time spacing: 16 usec (0x07)
        HT Max RX data rate: 952 Mbps
        HT TX/RX MCS rate indexes supported: 0-15
        VHT Capabilities (0x03c13aa2):
            Max MPDU length: 11454
            Supported Channel Width: neither 160 nor 80+80
            short GI (80 MHz)
            TX STBC
            SU Beamformer
            SU Beamformee
            +HTC-VHT
        VHT RX MCS set:
            1 streams: MCS 0-9
            2 streams: MCS 0-9
            3 streams: not supported
            4 streams: not supported
            5 streams: not supported
            6 streams: not supported
            7 streams: not supported
            8 streams: not supported
        VHT RX highest supported: 867 Mbps
        VHT TX MCS set:
            1 streams: MCS 0-9
            2 streams: MCS 0-9
            3 streams: not supported
            4 streams: not supported
            5 streams: not supported
            6 streams: not supported
            7 streams: not supported
            8 streams: not supported
        VHT TX highest supported: 867 Mbps
        Bitrates (non-HT):
            * 6.0 Mbps
            * 9.0 Mbps
            * 12.0 Mbps
            * 18.0 Mbps
            * 24.0 Mbps
            * 36.0 Mbps
            * 48.0 Mbps
            * 54.0 Mbps
        Frequencies:
            * 5180 MHz [36] (20.0 dBm) (no IR)
            * 5200 MHz [40] (20.0 dBm) (no IR)
            * 5220 MHz [44] (20.0 dBm) (no IR)
            * 5240 MHz [48] (20.0 dBm) (no IR)
            * 5260 MHz [52] (20.0 dBm) (no IR, radar detection)

5 GHz Problems. Can someone help me with a single beacon?

Hello Everyone,

Forum is not letting me upload. Single AP beacon here (and one to STA). here.

http://s000.tinyupload.com/?file_id=35330149943409538026

http://s000.tinyupload.com/?file_id=37198976868210331014

I am not able to see the traffic on Kali with Alfa 36ACH on 5GHz on many APs. This my AP is an example. 2.4GHz is fine.

What "iw" command do I need to run to see clients of this AP?

Many thanks!

Jesus, this CAPTCHA expired again. It takes 5 minutes with 10 CAPTCHA screens. Who thought of putting this on logged in users???

As requested:

Association Request From Client: http://s000.tinyupload.com/?file_id=06332711958857720015

lsusb: Realtek Semiconductor Corp. RTL8812AU 802.11a/b/g/n/ac 2T2R DB WLAN Adapter



iw phy phy5 info 

    Band 2:
        Capabilities: 0x19f2
            HT20/HT40
            Static SM Power Save
            RX Greenfield
            RX HT20 SGI
            RX HT40 SGI
            TX STBC
            RX STBC 1-stream
            Max AMSDU length: 7935 bytes
            DSSS/CCK HT40
        Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
        Minimum RX AMPDU time spacing: 16 usec (0x07)
        HT Max RX data rate: 952 Mbps
        HT TX/RX MCS rate indexes supported: 0-15
        VHT Capabilities (0x03c13aa2):
            Max MPDU length: 11454
            Supported Channel Width: neither 160 nor 80+80
            short GI (80 MHz)
            TX STBC
            SU Beamformer
            SU Beamformee
            +HTC-VHT
        VHT RX MCS set:
            1 streams: MCS 0-9
            2 streams: MCS 0-9
            3 streams: not supported
            4 streams: not supported
            5 streams: not supported
            6 streams: not supported
            7 streams: not supported
            8 streams: not supported
        VHT RX highest supported: 867 Mbps
        VHT TX MCS set:
            1 streams: MCS 0-9
            2 streams: MCS 0-9
            3 streams: not supported
            4 streams: not supported
            5 streams: not supported
            6 streams: not supported
            7 streams: not supported
            8 streams: not supported
        VHT TX highest supported: 867 Mbps
        Bitrates (non-HT):
            * 6.0 Mbps
            * 9.0 Mbps
            * 12.0 Mbps
            * 18.0 Mbps
            * 24.0 Mbps
            * 36.0 Mbps
            * 48.0 Mbps
            * 54.0 Mbps
        Frequencies:
            * 5180 MHz [36] (20.0 dBm) (no IR)
            * 5200 MHz [40] (20.0 dBm) (no IR)
            * 5220 MHz [44] (20.0 dBm) (no IR)
            * 5240 MHz [48] (20.0 dBm) (no IR)
            * 5260 MHz [52] (20.0 dBm) (no IR, radar detection)