Hello,
I have some PCs with different version of wireshark (all are of version 1.x).
On my own PC, the dissector is working fine.
On the lab PC, I'm getting error on the f.fieldname = ProtoField.new("name", "description", ftypes.UINT16) line:
bad argument #3 to 'new' (ProtoField_new: Unsupported ProtoField field type)
I'd be glad to have some assistance what is the issue.
eventually I'm using ftypes.BYTES which solves the issue.
I don't know which specific version(s) of Wireshark your lab PC's are running, but the old way prior to version 1.8 should be to omit the ftypes. prefix, like so:
f.fieldname = ProtoField.new("name", "description", UINT16)
Compare how ftenums[] is declared between version 1.6 and version 1.8.
If you can't update your lab PC's to the latest stable version, then you might want to consider at least updating them to the latest 1.X version possible. Reference the End of Life planning table on the Wireshark LifeCycle wiki page for some guidelines that may help decide which version is likely possible in your case.
Asked: 2018-08-02 06:21:14 +0000
Seen: 627 times
Last updated: Aug 21 '18
I don't know what the problem is, but all 1.x versions of Wireshark have gone End of Life. If possible, I would recommend that you upgrade to one of the supported versions of Wireshark and see if that resolves your problem.
This is little bit problematic
On your own PC you have a different (1.x) version of Wireshark then in the lab? Is it a problem on all Wireshark installation in the lab? The Lua interface has had an overhaul in the 1.x era, so you'll have to dig up that relevant Lua API for the lab machine to work with.
I've tried few PC's in the lab. I think that all of them has the same issue.
Unless you start comparing version numbers there's little to go on....