This is a static archive of our old Q&A Site. Please post any new questions and answers at ask.wireshark.org.

Adwin protocol

0

Hi,

anyone who can help with this ADwin frame ? (Especially the Gateway IP)

ADwin configuration protocol
ADwin Debug information
    Unused
    Unused
Pattern: Unknown (0x6e4c9d8c)
Version: 1087455434
Status: 0x3d2d682c, Status Configurable, Status Bootloader boots, Status Bootloader receive
   .... .... .... .... .... .... .... ...0 = Status Bootloader: False
   .... .... .... .... .... .... .... ..0. = Status Reprogrammable: False
   .... .... .... .... .... .... .... .1.. = Status Configurable: True
   .... .... .... .... .... .... .... 1... = Status Bootloader boots: True
   .... .... .... .... .... .... ...0 .... = Status Bootloader reprogrammable: False
   .... .... .... .... .... .... ..1. .... = Status Bootloader receive: True
   .... .... .... .... .... .... .0.. .... = Status Bootloader reprogramming done: False
   .... .... .... .... .... .... 0... .... = Status EEPROM Support: False

server version (beta part): 230 Server version: 51930 XILINX Version: 0x8adac926 MAC address: 05:a4:25:f8:6e:3e (05:a4:25:f8:6e:3e) Port (16bit): 41662 DHCP enabled: True Netmask count: 237 Gateway IP: 110.46.141.140 Reply with broadcast: True Scan ID: 0x68437261

Many thanks

Erwin

asked 22 Jan '17, 05:40

Erwin%20R's gravatar image

Erwin R
6112
accept rate: 0%

edited 22 Jan '17, 09:12

Jaap's gravatar image

Jaap ♦
11.7k16101

1

"help me with this frame" is not really a question... what do you want to ask precisely?

(22 Jan '17, 06:26) Jasper ♦♦

Jasper,

thank you for your interest in my request for help. As asked precisely , let us start with the meaning of the "Gateway IP: 110.46.141.140" . Locating that IP learned me that this a host based in Hong Kong. To continue : what is the purpose of sending this frame in general. I assume this frame has some sense . Next, I would like to know the meaning of "MAC address: 05:a4:25:f8:6e:3e (05:a4:25:f8:6e:3e)" . What could possibly be the host ?

I want to know why my Android device is putting this frame on the wire(less).

I know 0 about "Adwin Config". Googling for more human readable information did not help me any further.

I am looking for some general explanation, probably to fire my next questions for help.

Kind regards

Erwin

(22 Jan '17, 08:09) Erwin R

Are you sure, that this is really an Adwind Frame?

Each TCP or UDP packet has a source and a destination port. If a UDP packet has a source port of 123 and a destination port of 53 Wireshark would not know, if it is NTP or DNS. The Decode-As Context menu helps.

And, thank you for asking, the afford-mentioned port combination should not be seen on the wire, but is send by a bunch of cable modems anyway.

Can you upload the tracefile for us?

(22 Jan '17, 08:49) packethunter