NSA3.x id-UECapabilityInfoIndication malformed issue
In order for the UE to search/add 5G NR in NSA3.x, the EN-DC supported network broadcasts upperLayerIndication-r15 in SIB2 and from the wireshark 2.6.4, this seemed to be malformed and wondering when wireshark will support NR messages?
nonCriticalExtension
nonCriticalExtension
nonCriticalExtension
nonCriticalExtension
ce-Parameters-v1350
nonCriticalExtension
nonCriticalExtension
phyLayerParameters-v1430
alternativeTBS-Index-r14: supported (0)
mac-Parameters-v1430
shortSPS-IntervalFDD-r14: supported (0)
skipUplinkDynamic-r14: supported (0)
skipUplinkSPS-r14: supported (0)
rlc-Parameters-v1430
extendedPollByte-r14: supported (0)
otherParameters-v1430
mmtel-Parameters-r14
delayBudgetReporting-r14: supported (0)
ce-Parameters-v1430
nonCriticalExtension
lwa-Parameters-v1440
mac-Parameters-v1440
nonCriticalExtension
otherParameters-v1450
nonCriticalExtension
basebandParameters-r15
something unknown here [too long integer(per_normally_small_nonnegative_whole_number)]
[Expert Info (Warning/Undecoded): something unknown here [too long integer(per_normally_small_nonnegative_whole_number)]]
[something unknown here [too long integer(per_normally_small_nonnegative_whole_number)]]
[Severity level: Warning]
[Group: Undecoded]
[Malformed Packet: LTE RRC]
[Expert Info (Error/Malformed): Malformed Packet (Exception occurred)]
[Malformed Packet (Exception occurred)]
[Severity level: Error]
[Group: Malformed]
Thanks for the advice, i used 2.9.0.2351 and it was able to decode a little bit further but i am still seeing malformed packets as shown below:
nonCriticalExtension nonCriticalExtension nonCriticalExtension nonCriticalExtension ce-Parameters-v1350 nonCriticalExtension nonCriticalExtension phyLayerParameters-v1430 alternativeTBS-Index-r14: supported (0) mac-Parameters-v1430 shortSPS-IntervalFDD-r14: supported (0) skipUplinkDynamic-r14: supported (0) skipUplinkSPS-r14: supported (0) rlc-Parameters-v1430 extendedPollByte-r14: supported (0) otherParameters-v1430 mmtel-Parameters-r14 delayBudgetReporting-r14: supported (0) ce-Parameters-v1430 nonCriticalExtension lwa-Parameters-v1440 mac-Parameters-v1440 nonCriticalExtension otherParameters-v1450 nonCriticalExtension otherParameters-v1460 nonCriticalExtension irat-ParametersNR-r15 en-DC-r15: supported (0) pdcp-ParametersNR-r15 rohc-Profiles-r15 0... .... profile0x0001-r15: False .0.. .... profile0x0002-r15: False ..0. .... profile0x0003-r15: False ...0 .... profile0x0004-r15: False .... 0... profile0x0006-r15: False .... .0.. profile0x0101-r15: False .... ..0. profile0x0102-r15: False .... ...0 profile0x0103-r15: False 0... .... profile0x0104-r15: False rohc-ProfilesUL-Only-r15 .0.. .... profile0x0006-r15: False sn-SizeLo-r15: supported (0) Item 1 UE-CapabilityRAT-Container rat-Type: eutra-nr (6) ueCapabilityRAT-Container: 004084100104d00004410031000000441051028000044108… UE-MRDC-Capability rf-ParametersMRDC [Malformed Packet: LTE RRC] [Expert Info (Error/Malformed): Malformed Packet (Exception occurred)] [Malformed Packet (Exception occurred)] [Severity level: Error] [Group: Malformed]On which release is your product based? Up to now you had incompatible changes between versions released each quarter. The latest Wireshark version is based on the latest release available, while you could be using an older version.
5G NR 3GPP release June 2018
Which is not backward compatible with September 18 release seems like. You can blame 3GPP for this... If you have a development environment, you can build an older 2.9.0 version from last summer to decode it.