mqtt protocol not recognized [closed]

asked 2018-10-04 12:41:26 +0000

this post is marked as community wiki

This post is a wiki. Anyone with karma >750 is welcome to improve it.

Hello there.

I have a connection between a mqtt broker and a client on the standard port 1883. The communication is visible in wireshark. IP,TCP is shown but mqtt is not recognized.

edit retag flag offensive reopen merge delete

Closed for the following reason the question is answered, right answer was accepted by nr54321
close date 2018-10-08 06:25:49.421302

Comments

What version of Wireshark are you running? Can you provide Help -> About Wireshark details?

Without knowing anything more, I might suggest that you check the MQTT protocol preferences (Edit -> Preferences -> Protocols -> MQTT) to be sure the MQTT TCP port is set to 1883. You could also check to make sure the MQTT dissector is enabled: Analyze -> Enabled Protocols... -> MQTT.

cmaynard gravatar imagecmaynard ( 2018-10-04 13:36:19 +0000 )edit

Hello,

thanks for replying.

The version is 2.6.3, the MQTT Port ist set to 1883 and the dissector is enabled for mqtt.

nr54321 gravatar imagenr54321 ( 2018-10-04 14:53:18 +0000 )edit

Ok. I tested an other broker and it works there. Might be a problem with the broker.

nr54321 gravatar imagenr54321 ( 2018-10-04 14:57:06 +0000 )edit
add a comment