Hi All
I'm trying to capture the MJPEG-TS video output properties. I tried below link for Mjpeg parse from below link. https://wiki.wireshark.org/mpeg_dump.lua. I'm facing below error while saving with dump. Please let me know the solution for this.
Error: Lua:Erro During execution of dialog callback: MPEG_packet_dump.lua:70:attmpt to call global 'debug''(a table value).
The wiki page, and the lua code, note that it was last tested with Wireshark version 1.11.3, which is very old. What version are you using? There's likely been some changes to the lua support that have broken the script.
You could try commenting out the offending line 70 of the script, i.e. the debug call which doesn't do anything useful.
Please report back if you do get it to work so the Wiki page can be updated.
The lua script works with the all versions of Wireshark after either commenting out the debug command or changing it to something else (I used print). The lua script requires Wireshark to know that the payload is MPEG-TS frames. The info column should say the packets are MPEG-II or MP2T frames. If it doesn't, make sure that UDP is configured to decode the UDP port as RTP. In the RTP detail, it will show a payload type 33 and then TS information below it.
It would help if you had a screenshot or small pcap (less than 100 packets) to look at
Asked: 2020-01-13 07:26:48 +0000
Seen: 1,761 times
Last updated: Mar 11 '21
